Brink's Home Security^® Authorized Dealer
Serving Upper East Tennessee, Southwest Virginia and the Roanoke Valley

Site Map

Testing Your System Via the Web and Customer Internet Access:

1. Visit www.SAI-Security.com and access your security information by clicking the Customer Internet Access button.
2. Login using your User ID and Password.
3. Click the "Place Account On Test" button and follow instructions.
4. Once your system is "On Test", make sure your alarm system is turned on.  Begin tripping your alarm system by opening any protected doors or windows.

Your alarm siren will go off once you trip the security system!

5. Let the siren (or bell) sound for at least 60 seconds to ensure enough time for the test signal to be received at the central monitoring center.

Note:  During the time period your system is placed on test, the central station will take no action on any signals received.

6. When done testing your security system you can review the results of the system test by clicking on the "Reports" tab and then selecting the "On Test History" link within your Customer Internet Access account.
7. To put your system back in service, click the "Place Account Off Test". If you forget to click the "Place Account Off Test" button your system will automatically be placed back in service one hour after you placed your system "On Test".

Testing Your System Via Phone:

1. Call the SAI central monitoring center at (800) 705-7681.
2. Tell the operator you wish to conduct a test of your alarm system.  You will need to provide the following information:

•  Your name and/or your SAI Account Number
•  Your Personal Identification Number
•  How long you wish your system to be placed on test

3. Once your system is "On Test", make sure your alarm system is turned on.  Begin tripping your alarm system by opening any protected doors or windows.

Your alarm siren will go off once you trip the security system!

4. Let the siren (or bell) sound for at least 60 seconds to ensure enough time for the test signal to be received at the central monitoring center.

Note:  During the time period your system is placed on test, the central station will take no action on any signals received.

5. When done testing, call the central monitoring center again and request the results of your test.  Tell the operator you wish to place your system back in service.  If you forget to call the central monitoring center after you are done testing, your system will automatically be placed back in service when the requested amount of testing time has expired.

Send mail to webmaster@thesecuritysolution.com with questions or comments about this web site.
Copyright © 2005 Security Solutions & Technology, Inc.
Last modified: 09/30/05